Liquid resin casting machine
PP series
Mixes two-component silicone rubber and discharges at predetermined amount. Optimum for roll forming and forming of coating and filler materials.
Features
- ・Exclusively designed plunger injector enables low capacity to high capacity injection
- ・Use of static mixer for mixing two liquid components
- ・Upward injection is selectable for reduction of air entrainment in roll forming
- ・Shut-off nozzle fitted as standard equipment for thorough prevention of resin leakage
- ・Material should be supplied from pails as a standard. Drums and cartridges can be chosen as an option.
- ・Able to meet the needs for use of multiple nozzles and discharge devices, fitting into existing equipment, variable mixing ratio and continuous discharge.
Specification
| PP-200-L | PP-3000-L | |
| Discharge volume | 200c㎥ | 3050c㎥ |
| Discharge pressure | 18MPa | 18MPa |
| Pressure-feed speed | 13c㎥/sec～128c㎥/sec | 10c㎥/sec～155c㎥/sec |
| Shut-off nozzle system | Pneumatic ball valve | Lever-operated ball valve |
| Mixer cooling system | Cold water | Cold water |
| Mixing ratio | 1:1 | 1:1 |
| Applicable material container | JIS straight-sided steel pail | JIS straight-sided steel pail |
| Machine weight | 1.5t | 2.5t |
| Ｗ×Ｄ×Ｈ（ｍｍ） | 1000×1420×2395 | 1000×1520×2970 |